Stain Remover For Wedding Gowns

Every morning I open up my e-mail and receive many wonderful comments and good questions.

Last week, I received a tip on how to remove a stain from a wedding or bridesmaid dress.

In all my years as a wedding coordinator, I don’t remember a bride or bridesmaid spilling anything.

Maybe that was partly because we made sure they didn’t drink or eat anything that could cause stains.

It’s really important for a bridal party to have food and drink around, especially if the photo session before the ceremony lasts for hours.

And often times, they do.

I asked the bride to bring things such as water to drink and cheese, crackers and green grapes to eat.

Someone is always in danger of fainting under the warm lights or the hot sun outside, so it’s always a good idea to have something in their stomachs.

But, there’s always the chance of spilling something other than food or water on your gown.

You might drop your makeup or lipstick or who knows what and have a catastrophe on your hands.

So, Janet sent this tip and I wanted to pass it along to you.

Now, mind you, I haven’t tried this tip myself, but it sounds like Janet has used it several times and I’m willing to try anything when it comes to removing a stain on formal wear, aren’t you?

Especially when someone else has already been courageous enough to try it and had success!

She even included detailed instructions.

Thank you, Janet!

She wrote:

“I saw your tips for brides and bridesmaids and I wondered if I might add to your suggestions? I always try to bring what I call a ” bride’s emergency kit “. It is actually only one thing, but it has saved the day many times. It is a product most people have probably heard of called Dryel. It was created to allow you to freshen up your dry cleanable clothes in your own dryer, but it also contains an excellent stain remover.

It seems that inevitably just before the wedding, either the bride to be or one of her bridesmaids, spills something on their dress. When it happens, I take the bottle of stain remover and the absorbent pad and am able to remove most, if not nearly all, of the stain. You just slip the enclosed absorbent pad under the stained material and apply the stain remover sparingly to the spot, being careful to keep the liquid and pad away from their skin and yours. The pad absorbs any excess liquid and also provides a safe area to, using the top of the closed bottle, gently work the stain around until it disappears. The product really is amazing!

Dryel is found at Walmart, Target, most grocery stores, etc. My daughter uses it when she doesn’t have enough time to take something to the cleaners.

So, I just went into our laundry room and found her container of Dryel in the cupboard.

This is what it looks like, if you’re not familiar with it:

And, sure enough, it has a stain pen right inside:

 

She’s a “Tide To Go” fan, so I bet she didn’t know about this little gem.

Janet wrote about a stain bottle. I don’t know if it’s the same solution.

I e-mailed her last week and haven’t heard back from her yet.

Have you tried this product and stain treatment yourself?

I’d love to hear your comments on this or other stain removing secrets.

How To Hem Jeans Using The Original Hem

So many of you have wondered how to hem your jeans by using the original rolled hem.

I had never done this before as I hadn’t personally had any customers ask for it.

Until now.

My own daughter asked me to hem hers that way.

So, who better to try a new technique on than my own offspring?

Based on her recommendations, which corresponded to some of your instructions, I hemmed her jeans in no time.

I’ve always written posts based on alterations I have done before.

Some of them I’ve done hundreds of times.

But, this is the first post where I am a rookie.

So, please leave a comment or send me an e-mail with your technique for getting this done.

(Update January 12th: Here is a photo of my daughter’s jeans using two different techniques:

The technique for the leg on the right (Technique #1) is described below.

Ignore the thread bits I forgot to pull off the hem before I shot the photo!

I did the left leg based on instructions that Blankenmom gave us in the comment section and the link which shows us step by step how she does it.

Technique #1

The basic idea is that I am going to cut off the old hem and restitch it farther up the pant leg.

The new seam I make will next to the stitching on the original rolled hem.

Let’s take a look at this technique step by step.

First, I had my daughter try on the jeans.

I folded up the jeans and pinned the denim where she wanted the bottom edge of the hem to be:

Next, I pressed that bottom edge with an iron:

(Yes, you could turn the hem to the inside and press it the other way, but this edge isn’t going to show later, so I eliminated a step by just pressing it as is.)

This pressed edge will be our guide to show us where to stitch the new seamline for the hem.

The next step is to trim off the original hem edge.

I don’t want to cut right next to the rolled hem edge because that wouldn’t give me any seam allowance and I’d have to sew over the big hump of fabric at the hem.

I decided that one inch allowance gave me enough “insurance” and gave the hem enough extra fabric so that the hem doesn’t roll to the outside while wearing the jeans.

So, I cut the jeans like this:

Do you see the extra fabric I have to the right of the scissors?

I cut it far enough away that I can make a seam allowance.

That’s the amount that is crucial to the success of this hem. Make sure you give yourself enough denim.

As I mentioned, I gave it an inch.

This is what it should look like, completely cut away from the jeans:

Next, you’re going to match this “circle of denim” right sides together to the pant leg.

Match up the side seams.

then, pull ithe “circle” down the leg (up the leg?) like this and pin below that pressed fold:

Now, we’re going to make sure it is in the right spot.

Fold up that original rolled hem and peek under the cut edge to make sure the rolled hem edge lines up with the fold that you pressed earlier like this:

Looking at the above photo, the pressed folded edge is lined up with the rolled hem edge. You just can’t see it because the rolled hem is covering it up.

But, it’s there, under my thumbnail.

Everything from the top of my thumb down, will be what the jeans will look like when we’re finished.

Is this making sense?

Ok, holding that rolled hem edge very carefully, so that nothing slips, unfold that rolled hem edge and put a pin in that spot like this:

You’re now going to sew right next to the rolled hem edge like this:

Just make sure you don’t sew over any pins.

Take them out before that happens!

Now. fold the raw edges under to the inside of the jeans.

From the right side of the jeans, the new hem should look like this:

This is what it looks like if you peek inside the jeans:

My raw edges are not finished yet.

I want my daughter to try them on first, before I trim anything or finish the edges.

This is what they look like after I pressed them on the outside:

Ok, now you’ve seen this first technique.

Now jump over to Blankenmom’s website and see how she does it.

My daughter liked her technique better.

I do too.

It seems like the hem will stay down better and not flip up.

It also encases the raw edges, which is another plus.

Thanks again, Blankenmom!

We all learned something new.

%d bloggers like this: